MAX-GAIN SYSTEMS, INC. - Coaxial Cables with Connectors

We now stock a wide range of coax jumpers with either 10 inches or 36 inches of RG-174 coax (50 ohms), highest quality! These strain-relief cables are designed to prevent damage to the antenna connectors of handie talkies or other delicate equipment when connecting to external antennas with stiff coax such as RG-8.Without these cables, it is likely that the stiff coax will destroy the connector on your handie talkie, causing expensive damage! Our strain relief cables are of highest quality, and use RG-174 super-flexible coax, with 50 ohms impedance. Available in both 10 inch and 36 inch lengths. (order with appropriate stock number for length desired.)

Click on part numbers or camera icon in the table below for photos of each cable.

Type SMA male / male jumpers with semi-rigid hardline

These brand new super low loss jumpers are made to mil spec by Amphenol, and are packaged in sealed bags of 5 jumpers per bag. Connectors are gold plated / Teflon SMA males (both ends). Cable is 50 ohm semi-rigid hardline of .141 inch diameter. Both ends of the cable are formed in a radius. Length across the longest portion (top) is 3.25 inches (center to center of SMA connectors. Length of short end is about .875 inch. Length of long end is about 1.625 inch It is possible to straighten the radius bends out without damage to the cable if VERY carefully done. Hundreds available, new, old stock.

Order stock number: CC-SMA-01 Price is an amazing $2 per pack of FIVE jumpers! (Order Now!)

Click picture to enlarge

Coaxial cables with type TNC connectors (Condition is removed from military equipment, guaranteed serviceable) (Click on the links or below to view the pictures. )

TNC male / TNC male, approximately 12 inches long, with RG-223 (50 ohms, double shielded, mil-spec) Our stock number CC-03 Price each: $5.00
TNC male (one end only), other end is open cutoff . Cable is RG-174, mil-spec. Lengths vary, but average is about 36 inches. Our stock number CC-04 Price each: $3.00
TNC male (right angle) / TNC female . Lengths average 12 inches to 15 inches. RG-223 (50 ohms, double shielded, mil-spec) Our stock number CC-05 Price each: $5.00
TNC male / TNC female, bulkhead, single hole, panel mount . Lengths average 10 inches. RG-223 (50 ohms, double shielded, mil-spec) Our stock number CC-06 Price each: $4.00
TNC male / TNC female . Lengths average 21 inches. RG-223 (50 ohms, double shielded, mil-spec) Our stock number CC-07 Price each: $5.00
TNC female / TNC female bulkhead, single hole, panel mount . Lengths average 26 inches. RG-223 (50 ohms, double shielded, mil-spec) Our stock number CC-08 Price each: $5.00
TNC female bulkhead, single hole, panel mount (both ends). Lengths average 26 inches. RG-223 (50 ohms, double shielded, mil-spec) Our stock number CC-09 Price each: $5.00
TNC male, right angle / TNC female . Lengths average 23 inches. RG-223 (50 ohms, double shielded, mil-spec) Our stock number CC-11 Price each: $5.00
TNC male, right angle / TNC female, bulkhead, single hole panel mount . Lengths average 29 inches. RG-223 (50 ohms, double shielded, mil-spec) Our stock number CC-13 Price each: $5.00
TNC male, right angle / TNC male, right angle . Lengths run 9.5 to 12 inches. RG-223 (50 ohms, double shielded, mil-spec) Our stock number CC-14 Price each: $5.00
TNC male / TNC male . Lengths run 6.5 to 7.5 inches. Cable looks like RG-174, teflon jacket. Our stock number CC-15 Price each: $5.00

Coaxial cables with type BNC connectors

BNC male / BNC male, 5 feet, 2 inches long. RG-62, 93 ohm, new, mil-spec. Our stock number CC-BNC-36 Price each: $4.00
BNC male / BNC male, 6 feet, long. RG-62, 93 ohm, new, mil-spec. Our stock number CC-BNC-37 Price each: $4.00

Coaxial cables with type C connectors (Condition is removed from military equipment, guaranteed serviceable) (Click on the links or below to view the pictures. )

C male right angle / C male right angle jumpers

We have a small supply of coax jumpers, 10 inches long, with type C male, right angle connectors on both ends. Cable is mil-spec RG-213, 50 ohms. Silver plated, Teflon connectors. Use cables as-is, or cut them in half to make your own handy custom ADAPTER cables. For instance, install a type UHF or type N on the cut end, and have the perfect adapter cable for your military receiver (such as R-390A) type C connector. Doing this will give you two possible adapters per cable, and the right angle C makes for a very neat installation behind your radio.

Refer to our stock number CC-18 Price each: $8

Ordering:

To order, use our secure online order form, or call us Monday through Friday 7 AM - 4 PM Eastern time at 770-973-6251.

You may also print the order form using your browser's print button and fax your order to us at 815-461-7730. PLEASE give us your email address so that we can easily contact you in case we have a question.