|
|
 |
 |
 |
|
|||||||
|
|
||||||
|
RF Relays with Type "N" Connectors Sage Labs SPDT RF relay, Model SAN2180E Price: $59 each (Order Now!) Transco P/N 800C00100 SPDT, latching, RF relay with type N female connectors.
Coils are 28 vdc. Has two coils... pulse voltage to one coil to select one position, pulse voltage to the other coil to change position. Coils should be pulsed only, and not left energized. While we have been unable to reference this exact part number through DowKey Microwave, the successor to Transco, the general families of similar relays are rated to a maximum of 12.4 Ghz with type N connectors. These similar relays list isolation of 75 db minimum to 1 Ghz, and 60 db minimum to 12.4 Ghz. Coil current on these types show about 1/2 amp required. These relays should easily handle a couple of kilowatts at HF. Measures 2.65 inches wide X 2.65 inches tall including the N connectors, and 1.09 inches thick. Weight is 203 grams, approx 7.2 ounces. Condition is removed from military equipment, satisfaction always guaranteed. Our stock # RLY-N-08 Price: $59 (Order Now!)
This relay has type N female connectors. 50 ohms. In one position, connector #1 is connected to connector #2, and at the same time, connector #3 is connected to connector #4. When the position is changed by pulsing the other coil, connector #1 is connected to connector # 3, and at the same time, connector # 2 is connected to connector # 4. See diagram in photo. Ratings DC-12.4 Ghz, 60 db minimum isolation at 12.4 Ghz., 90 db at 10 Mhz. 1.5:1 SWR at 12.5 Ghz., and 1.2:1 typical! Rated 100 watts at 12.4 Ghz, and 1000 watts at 1 Mhz. Has terminals for easy coil connections. Measures 3.2 inches long including N connectors, 1.75 inches wide (not counting the three chassis mounting tabs) and 1.75 inches high. Weight is 238 grams, about 8.5 ounces. Condition is removed from military equipment, guaranteed. Our stock # RLY-N-11 Transco P/N 300C00600 latching, TRANSFER type RF relay with position indicating contacts.
When the position is changed by pulsing the other coil, connector #1 is connected to connector # 3, and at the same time, connector # 2 is connected to connector # 4. See diagram in photo . This relay is similar to the 300C01400, except this version has POSITION INDICATING CONTACTS for easy remote indication of the switched state of the relay! Ratings DC-12.4 Ghz, 60 db minimum isolation at 12.4 Ghz., 90 db at 10 Mhz. 1.5:1 SWR at 12.5 Ghz., and 1.2:1 typical! Rated 100 watts at 12.4 Ghz, and 1000 watts at 1 Mhz. Has terminals for easy coil connections. Measures 3.2 inches long including N connectors, 1.75 inches wide (not counting the three chassis mounting tabs) and 1.75 inches high. Weight is 238 grams, about 8.5 ounces. Condition is removed from military equipment, guaranteed. Our stock # RLY-N-11A Price: $69 (Order Now!) Transco P/N 300C00200 latching, TRANSFER type RF relay with position indicating contacts and removable power plug. This relay has type N female connectors. 50 ohms. In one position, connector #1 is connected to connector #2, and at the same time, connector #3 is connected to connector #4. When the position is changed by pulsing the other coil, connector #1 is connected to connector # 3, and at the same time, connector # 2 is connected to connector # 4. See diagram in photo . This relay is similar to the 300C01400, except this version has POSITION INDICATING CONTACTS for easy remote indication of the switched state of the relay as well as a power plug for quick connect / disconnect. WE SUPPLY MATING PLUG AT NO CHARGE WITH RELAY PURCHASE! This relay has two 28 vdc coils, each coil is pulsed to change the state of the relay. The state latches into place and does not change until the opposite coil is pulsed. Coils should be pulsed only, and not left with power applied.
Our stock # RLY-N-11B Ordering: To order, use our secure online order form, or call us Monday through Friday 8 AM-5 PM Eastern time at 770-973-6251. You may also print the order form using your browser's print button and fax your order to us at 815-461-7730. PLEASE give us your email address so that we can easily contact you in case we have a question. Visa and Mastercard accepted! |
|
|
||||
|
Our customers have told us that the following terms have legitimately helped them find us, and the products that we index and sell on this page. If you have an idea of another term you were looking for where that need would be legitimately satisfied by goods indexed or found on this page only, please let us know. Please be very selective in suggesting additional terms for this section. We want potential customers to be able to quickly and easily find us, but under no circumstances do we want to "spam" anyone with unrelated search results! Transco RF relays, Sage Labs RF relays, Amphenol RF relays, RF relays with N connectors, type N relays, type N RF relays, SPDT relays with N connectors, transfer RF relays with N connectors
|
||||||
MGS Home
| 
Sage Labs SPDT RF relay with "N" female connectors and 26 vdc control voltage. These fine quality relays are made by Sage Labs, (Filtronic Sage Laboratories) of 11 Huron Drive, Natick, MA 01760 (508-653-0844) for military equipment, so they are mil-spec types. Rated at DC-8 Ghz at 1.3 to 1 SWR, and usable to 12 Ghz at 1.5 to 1 SWR or less. Power rating is 1 Kw average or 5 Kw peak at 1 Ghz, derated to 180 watts at 12 Ghz. Control connector is a very standard 3 conductor type with indexing key....see photo. Mating connector is not supplied, but should be readily and cheaply available (either new, or as a cut-off) from Bill Perry at the William Perry Company, 702 Beechwood Road (Rear), Louisville, KY 40207 Phone 502-893-8724. Length is 5 inches overall, Maximum width is 3.4 inches. Has 3 drilled and tapped holes on front shoulder for easy mounting. Removed from military equipment, satisfaction always guaranteed. 
Transco P/N 300C01400 latching, TRANSFER type RF relay. 
This relay has two 28 vdc coils, each coil is pulsed to change the state of the relay. The state latches into place and does not change until the opposite coil is pulsed. Coils should be pulsed only, and not left with power applied. 
This relay has type N female connectors. 50 ohms. In one position, connector #1 is connected to connector #2, and at the same time, connector #3 is connected to connector #4. 
This relay has two 28 vdc coils, each coil is pulsed to change the state of the relay. The state latches into place and does not change until the opposite coil is pulsed. Coils should be pulsed only, and not left with power applied. 
Ratings DC-12.4 Ghz, 60 db minimum isolation at 12.4 Ghz., 90 db at 10 Mhz. 1.5:1 SWR at 12.5 Ghz., and 1.2:1 typical! Rated 100 watts at 12.4 Ghz, and 1000 watts at 1 Mhz. Has terminals for easy coil connections. Measures 3.2 inches long including N connectors, 1.75 inches wide (not counting the three chassis mounting tabs) and 1.75 inches high. Weight is 238 grams, about 8.5 ounces. Condition is removed from military equipment, guaranteed. NSN is 5985-241-3503. DSA 900-73-M-F120 